An internally threaded drop in anchor for medium duty loads with anchor bolts and threaded rods.  Anchor has a lip to keep the anchor flush with the wall.  These anchors are for solid concrete walls only; not for use on brick walls.  Threads are designed for 3/8" bolts. 

How to Use

• Simply drill a hole in your wall to the required specifications (see below), insert this anchor and then "set" with the special designed Hilti anchor setting tool (sold seperately, click here).  
• Choose a climbing hold, and attach to wall with 3/8" threaded bolt.  Ensure that at least 12-15mm of the bolt protrudes from the bottom of the hold and a maximum of 35mm

Hole Requirements

• diameter 12mm
• depth 43mm exactly

Features

• A flared end for accurate setting flush with the surface
• independent of the hole depth; ideal for repetitive fastening with threaded rods of equal length (like bolts)
• No damage to the thread when driving in the anchor; easy to expand
• Visual verification of full expansionn 
• Anchor and setting tools form a matched system
• Manual or mechanically assisted setting tools
• Complete expansion after a few hammer blows
• Fire rated